• Operational Status: All agricultural implements, tools, and marine assets in this auction are being sold strictly AS-IS, WHERE-IS, with all faults, imperfections, and errors of description. The seller makes no warranties, representations, guarantees, or certifications regarding the mechanical capability, electrical functions, structural roadworthiness, or internal fluid seals of any item.
• Testing Limitation: While major external components are visually documented as present, these items have not been tested under power, pressurized with hydraulic fluid, hooked to a tractor PTO, or field-verified for this auction. Internal gears, blades, gearboxes, and electrical systems are unverified.
• Buyer Responsibility: Bidders are highly encouraged to personally inspect items prior to placing a bid. Dimensions and conditions provided are estimates only. The winning bidder assumes all responsibility and liability for the safe loading, proper securing, legal transport, and eventual field deployment of the item. No refunds, adjustments, or returns will be issued under any circumstances.

Up for bid is a gas-powered EZ-GO golf cart finished in hunter green with tan/beige seating. This versatile cart is in running condition and features a rear-facing back seat with safety bar and a rear cargo/utility deck — perfect for farm, ranch, estate, or recreational use. Equipped with aggressive off-road style tires on all four corners, making it capable well beyond the fairway. The fold-down windshield, full canopy top, and front push bumper round out a well-appointed package.

The cart shows normal wear consistent with farm and property use. The motor tag (Image 4) identifies this as a Kawasaki engine, Code FJ400D-CS07-R, Serial No. FJ400DB30240, Assembled in USA — a proven and reliable powerplant.

Highlights:

• EZ-GO gas-powered golf cart — Runs & Drives
• Kawasaki FJ400D engine
• Hunter green body, tan upholstery
• Rear-facing seat with safety bar
• Rear utility/cargo deck with diamond plate step
• Off-road all-terrain tires
• Fold-down windshield & canopy top
• Front push bumper

Up for bid is a pair of electric trolling motors, sold together as one lot. Both units show use and outdoor storage wear but present as complete motors with shafts, props, and mounting brackets intact. Both motors are untested and condition is unknown — buyer is encouraged to inspect prior to bidding.

Minn Kota Endura 55

• 55 lbs. thrust
• Tiller handle steering
• Variable speed control
• Bow or transom mount capable
• Complete with clamp-style transom bracket

MotorGuide Thruster 46

• 46 lbs. thrust, 12-volt
• Tiller handle steering
• Transom mount with clamp bracket
• Complete unit

Both motors are sold as-is, condition unknown. Great lot for the fisherman, spare parts, or get-back-on-the-water backup.

Highlights:

• 2 trolling motors — sold as one lot
• Minn Kota Endura 55 (55 lb. thrust)
• MotorGuide Thruster 46 (46 lb. thrust, 12V)
• Transom mount brackets included on both

Up for bid is a two-piece lot of cattle handling and management equipment, ideal for the working farm or ranch operation.

Squeeze Chute Head Gate A heavy-duty steel pipe-frame head gate with dual side chains for securing to a squeeze chute or working alley. Features a center slide bar mechanism for adjustment and securing the animal. Shows surface rust and weathering consistent with outdoor farm use — solid construction throughout.

Calf Cradle / Tipping Table A wire mesh calf cradle with aluminum frame and dual coil spring pivot arms — designed to restrain and tip calves for branding, castrating, vaccinating, or other routine procedures. Frame shows rust on the spring hardware; wire mesh body is intact.

Both pieces are sold as-is and show normal wear from working ranch use.

Highlights:

• Heavy-duty steel pipe head gate with chains
• Calf cradle/tipping table with wire mesh deck
• Dual coil spring pivot mechanism
• Working ranch equipment

Up for bid is a three-piece lot of cattle handling tools well-suited for any working farm, ranch, or livestock operation.

Springer Magrath Electric Cattle Prod A full-length yellow fiberglass-shaft electric prod by Springer Magrath, featuring a pistol-grip battery housing and green two-prong tip. A trusted name in livestock handling equipment. Shows normal use wear.

Hot-Shot Sorting/Sorting Sticks (Qty. 2) Two white fiberglass Hot-Shot brand livestock sorting sticks with wrapped rubber grips. Lightweight and durable — ideal for moving and directing cattle through chutes, alleys, and pens without causing stress. Both show use wear consistent with working ranch conditions.

All three items sold as one lot, as-is.

Highlights:

• Springer Magrath electric cattle prod — full length, pistol grip
• (2) Hot-Shot fiberglass sorting sticks
• Wrapped rubber grip handles
• Standard working ranch/livestock tools

Up for bid is a box lot of livestock health management tools from a working cattle operation.

Schering-Plough Ralogun Pellet Injector A Schering-Plough Animal Health Ralogun® Pellet Injector designed for use with Ralgro® pellets for beef cattle growth implants. Box includes one cartridge and 6 needles. A standard and well-known tool in beef cattle production.

Automatic Drenching/Dosing Gun A blue and yellow automatic livestock dosing/drenching gun with tubing and reservoir canister — designed for efficient delivery of liquid medications, dewormers, or supplements to livestock. Complete with tubing and canister.

Both items sold as-is. Condition of the Ralogun implant gun and dosing gun are unknown — buyer encouraged to inspect prior to bidding.

Highlights:

• Schering-Plough Ralogun® Pellet Injector w/ cartridge & 6 needles
• Automatic livestock dosing/drenching gun with tubing & reservoir
• Standard beef cattle health management tools

Up for bid is a heavy-duty serrated weed and brush cutter head mounted on a set of extension poles — ideal for cutting weeds, brush, and vegetation along fence lines, ditches, pond banks, and hard-to-reach areas.

The cutter features a wide serrated steel blade with aggressive double-sided teeth, mounted to an aluminum T-bracket connector. The blue steel extension poles thread together to provide significant reach, making this a practical tool for fence line maintenance and property cleanup without the need to bend or crouch.

Shows normal use wear with darkening and residue on the blade consistent with field use.

Highlights:

• Wide serrated steel weed/brush cutting blade
• Double-sided aggressive tooth pattern
• Aluminum T-bracket pole connector
• Blue steel extension poles included
• Ideal for fence lines, ditches, pond banks & pasture edges

Up for bid is a 16-foot steel tandem axle bumper pull horse and cattle trailer. This is a working ranch trailer that has seen real use and is ready to haul horses, cattle, or other livestock. Currently titled in North Carolina (plate visible in photos).

The trailer features an enclosed front nose with a small window, open slat sides for ventilation, a center divider gate, and a side access door with latch hardware. Interior shows wood-lined lower side walls, rubber mat flooring, and a metal front compartment with tie rings along the top rail. The interior is used and dirty but structurally sound in appearance.

Running gear includes tandem Carlisle Sport Trail tires on steel wheels, with a matching Carlisle Sure Trail 7.00-15LT spare mounted on the front nose. The tongue features a ball coupler hitch with breakaway safety cable and jack stand.

Shows surface rust, paint wear, and general use consistent with a working farm trailer. Buyer should inspect tires, floor, brakes, and lights prior to bidding.

Highlights:

• 16' tandem axle bumper pull horse/cattle trailer
• Enclosed nose with window & exterior spare tire mount
• Open slat ventilation sides
• Center divider gate
• Wood-lined lower walls & rubber mat flooring
• Carlisle Sport Trail tires w/ matching spare (7.00-15LT)
• Ball coupler hitch w/ breakaway safety cable & jack
• NC titled

• Frame Structure: Heavy-duty steel structural frame featuring the original factory red and black finish with legible yellow "HOWSE" branding decals. 
• Wear Parts Condition: The twin shares, moldboards, and landsides are fully intact and structurally sound. They exhibit typical surface rust from being stored outdoors in a pasture setting, which will naturally scour clean once pulled through abrasive soil. The cutting edges show normal field use but remain serviceable.
• Hitch Setup: Outfitted with standard Category 1 drawpins and top link spacing, allowing quick and simple attachment to most standard utility tractors.

• Brand: Howse Implement
• Type: 2-Bottom Moldboard Plow
• Hitch Class: Category 1 (3-Point)
• Application: Primary Tillage / Garden & Food Plot Prep

• 8-Foot Working Width: The wide moldboard maximizes ground coverage per pass, efficiently tackling large tracking sections.
• Angle & Rotation Adjustability: Outfitted with a manual pull-pin indexing turntable mechanism. The blade can be angled left or right, or spun completely backward for reverse backfilling operations.
• Arched Lift Frame Design: The yellow-painted main frame utilizes a classic high-clearance arched layout, which provides excellent structural strength and prevents dirt or debris from binding during deep cuts.
• Cutting Edge & Structural Condition: The reversible bolt-on steel cutting edge is entirely intact across its full length. The implement exhibits uniform surface rust from pasture storage, but the moldboard skin is solid and straight, with no severe pitting, holes, or impact bends. The main pivot and angle pin function as intended.

• Width: 8 Feet (96 inches)
• Hitch Type: 3-Point Standard Setup
• Color: Industrial Yellow
• Adjustment: Manual Pivot Pin / Multi-Position

• Hull & Design: Engineered with a wide 48-inch flat bottom and structured external tracking ribs to offer excellent stability when casting, standing, or hauling heavy equipment. Built from durable, heavy-gauge marine aluminum.
• Hardware & Mobility: Equipped with dual heavy-duty stern lifting handles and a secure bow-mounted handle with an attached tow rope cleat, allowing for easy manual launching, loading, and tie-offs.
• Condition: The hull is in used, project condition. There is a prominent 8 to 10-inch structural split and tear along the port-side bow corner seam that will require professional aluminum welding or patching before the vessel is seaworthy. The exterior features typical cosmetic weathering, minor surface scrapes, and a distinct waterline stain across the transom, but the bottom ribs and side walls remain structurally sound.
• Inclusions: Includes the aluminum hull shell only. No interior bench seats, oars, outboard motor, trailer, or registration paperwork are included in this lot.

• Drive Mechanics: Utilizes a standard 540 RPM PTO input linked to a heavy-duty gear-driven cutterbar. Includes the factory input shaft assembly, a high-tension stabilization spring, and dual hydraulic lines configured to work with standard tractor rear remotes.
• Safety & Protection: Outfitted with an overhead metal protective frame and a full-length, heavy-duty black vinyl safety curtain designed to contain flying debris, rocks, and crop discharge during high-RPM operations.
• Condition: The machine is in used, unverified operational condition. All major mechanical components—including the multi-disc cutterbar, structural framework, 3-point hookups, and PTO shaft—are present and show normal wear from outdoor storage and past field use. The hydraulic hoses are intact but may show typical surface aging. The cutterbar gear bed has not been opened or tested under power for this auction. Sold strictly AS-IS.
• Inclusions: Includes the complete 275 mower unit, PTO driveline shield, safety curtain, and structural lift components as pictured.

• Brand: John Deere
• Model: 275
• Serial Number: XECO275A162455X
• Required PTO Speed: 540 RPM
• Hitch Type: Category II 3-Point Hitch
• Cutterbar Type: Segmented Gear-Driven Disc

• Structural Frame: Constructed with heavy-gauge steel deck plating and thick structural steel channel bracing. Includes an adjustable rear tailwheel to control cutting height and a standard 3-point A-frame hitch configuration.
• Debris Control: Equipped with a factory steel front guard housing a continuous chain curtain, ensuring maximum operator and tractor protection from discharging materials.
• Condition: The implement is in used, unverified operational condition. The outer deck body shows a light layer of surface scale, fading paint, and embedded organic field dust from storage, but retains strong structural integrity. The plastic safety sleeve over the PTO shaft is cracked and split, requiring attention or replacement for optimal safety. The internal gearbox turns, but the blades and lower stump jumper have not been inspected or tested under power for this auction. Sold strictly AS-IS.
• Inclusions: Includes the complete 6' mower assembly, tailwheel mechanism, front chain shields, and PTO input assembly as pictured.

• Brand: Bush Hog
• Model: 286
• Serial Number: 12-21692
• Cutting Capacity: Up to 3" diameter brush (factory rated)
• Input Speed: 540 RPM
• Deck Design: Round Back / Open Transom

• Structural Frame: Constructed from high-strength steel with automated welds and deep-channel cross bracing for rigidity. Includes a standard Category I 3-point top link mast and a manual height-adjustable rear tailwheel arm to regulate your cutting depth.
• Safety Features: Equipped with built-in front deflectors and comprehensive factory safety warnings across the deck. The full-length yellow plastic PTO sleeve remains in place to isolate the spinning internal drive shaft during operation.
• Condition: The implement is in used, unverified operational condition. It displays an excellent cosmetic appearance with minimal paint fading, very little oxidation, and a light coat of surface field dust from outdoor storage. The tailwheel, frame structure, and top links are straight and completely intact. The internal blades and gearbox oil levels have not been evaluated or tested under tractor power for this listing. Sold strictly AS-IS.
• Inclusions: Includes the complete 6-foot mower assembly and the shielded PTO input assembly as pictured.

• Brand: Bush Hog
• Model: SQ720
• Serial Number: 12-40731
• Cutting Capacity: Up to 2" diameter material (factory rated)
• Input Speed Required: 540 RPM
• Deck Profile: Round-Back Discharge

• Mechanism & Controls: Features a dual-side manual sweep door design operated by top-mounted control levers with textured hand grips. The symmetrical interior pipe curvature safely contours to the animal's neck to maximize restraint while minimizing stress.
• Frame & Integration: Built from thick-gauge, heavy-duty tubular steel designed to withstand significant animal pressure. Equipped with multiple pre-welded side mounting tabs to easily pin or bolt the unit into existing fence lines, working alleys, or a stationary squeeze chute system.
• Condition: The unit is in used, weathered condition with a solid structure. The exterior tubular steel frame and internal sheet metal guards show widespread surface rust and paint peeling from typical outdoor exposure, but retain strong structural integrity with no major rust-through or bent frame rails. The top mechanism is complete, though the moving joints would benefit from standard lubrication prior to field use. A protective sheet metal top cover is installed to shield the upper mechanical linkage from rain and debris.
• Inclusions: Complete Floyd Gate Co. head gate assembly, integrated top manual levers, side mounting brackets, and overhead sheet metal protective cover.

• Brand: Floyd Gate Co.
• Type: Manual Livestock Head Gate
• Material: Heavy-Gauge Tubular and Sheet Steel
• Operation: Dual-Lever Manual Sweep
• Mounting: Integrated Pin/Bolt Side Brackets

• Rake Wheels & Delivery: Equipped with eight (8) high-clearance rake wheels configured in an adjustable V-pattern, featuring heavy-duty spring-steel tines designed to cleanly lift hay without introducing dirt. The independent wheel flotation allows individual wheels to smoothly track uneven terrain.
• Hydraulic Actuation: Features a centrally mounted, high-capacity Lion brand hydraulic cylinder linked to dual-side mechanical lift arms. Connected via long-reach hydraulic hoses with standard agricultural quick-connect couplings, allowing the operator to transition the wings seamlessly from the tractor seat between transport and field operation.
• Chassis & Towing: Built on a heavy-gauge box-steel trailer frame with high-clearance wheel arms. Supported by two (2) multi-ribbed implement tires mounted on heavy-duty agricultural hubs. Includes an adjustable clevis hitch tongue with an integrated parking jack and a heavy-gauge safety transport chain.
• Condition: The implement is in very clean cosmetic and operational condition. The factory red paint and silver Massey Ferguson branding decals are vibrant and sharp. The hydraulic cylinder shaft is smooth, free of pitting, and shows no evidence of active seal leaks. All tines across the eight wheels are straight, secure, and ready for the field. The tires retain deep tread and show standard outdoor storage dust.
• Inclusions: Complete 8-wheel V-rake assembly, Lion hydraulic cylinder with hoses, implement tires, safety chains, mechanical lock pins, and factory identification plates.

• Brand: Massey Ferguson (AGCO Corporation)
• Model Number: 1508
• Serial Number: 1508T0109
• Manufacturing Location: Duluth, Georgia, U.S.A.
• Configuration: 8-Wheel Pull-Type V-Rake
• Hydraulic Requirements: 1 Rear Tractor Remote (Double or Single-Acting depending on setup)

• Mechanical Drive System: Equipped with a mechanical input shaft connected directly to the right wheel hub assembly. Features a manual engage/disengage lever at the gearbox to stop basket rotation when towing down farm lanes or roads.
• Towing & Tracking: Modeled with a stationary front hitch tongue and an integrated manual screw jack setup to level the frame. High-clearance arched structure allows the machine to clear large windrows without dragging.
• Condition: The unit is in used, unverified operational condition. It displays a heavily weathered cosmetic appearance with substantial surface rust, fading graphics, and accumulated field dust from outdoor fence-line storage. The main structural arches, basket ends, and drawbar connection are physically sound and free of major impact cracks. The ground-drive gearbox and universal joints turn, but the machine has not been pulled at field speeds or actively tested behind a tractor for this auction. Sold strictly AS-IS.
• Inclusions: Includes the complete 256 trailing rake assembly and transport tires as pictured.

• Brand: New Holland
• Model: 256
• Serial Number: 609328
• Hitch Style: Pull-Type Drawbar Clevis
• Drive Input: Mechanical Wheel Clutch
• Tire Type: Multi-Ribbed Agricultural Tires

• 4-Rotor Distribution: Outfitted with four (4) counter-rotating rotor baskets featuring heavy-duty spring tines on flat steel tine arms. Designed to flip heavy orchard grass, clover, or alfalfa smoothly at high ground speeds without damaging the crop. 
• Hydraulic Fold System: Equipped with an integrated, central dual-acting hydraulic lift assembly connected to heavy-gauge folding wing hinge points. Allows the operator to fluidly transition the outer rotors into a narrow, compact vertical transport position directly from the tractor cab. 
• Chassis & Driveline: Built on a pull-behind trailer framework with a standard clevis hitch tongue. Powered via a standard 540 RPM PTO input shaft linked to a series of high-torque, oil-bath bevel gearboxes. Supported by four (4) independent flotation tires to ensure precise ground tracking across uneven terrain. 
• Condition: The unit is in very clean cosmetic and operational condition. The factory red paint and yellow model graphics are vibrant with minimal fading. The dual hydraulic folding lines are clean and securely routed, showing no signs of active fluid leaks. The PTO drive shaft is straight, universal joints turn freely, and the primary safety shield remains securely intact. All four transport tires maintain solid pressure. 
• Inclusions: Complete Galfrè GTS 520 4-rotor tedder, integrated hydraulic lift cylinder assembly with hoses, shielded 540 RPM PTO shaft, four flotation wheels, and factory safety placards. 

• Brand: Galfrè (Made in Italy)
• Model Series: GTS
• Model Number: GTS 520
• Working Width: 17 Feet
• Configuration: 4-Rotor Pull-Type / Trailing
• Operating Speed: 540 RPM PTO

• Structural Frame: Built with an open-center channel iron design that allows for easy adding of supplemental weight blocks if deeper ground penetration is required. Outfitted with heavy-duty cast bearing assemblies supporting the central steel axles.
• Cutting Elements: Equipped with independent left and right cutting banks hosting heavily weathered steel discs designed to chop crop residue and flip compacted soil.
• Condition: The machine is in used, unverified operational condition. It displays a heavy, uniform surface rust scale and outdoor aging across the entire frame and disc blades. The main frame structure, A-frame top mast, and lower hook pins are physically straight and solid. The individual disc gangs have not been pulled through soil, and the inner bearing grease wells have not been evaluated or tested for rotation under load for this listing. Sold strictly AS-IS.
• Inclusions: Includes the complete vintage disc harrow assembly and attached lower connection pins as pictured.

• Brand: Dearborn
• Frame Profile: Open Tandem Frame
• Serial Number: 1347
• Hitch Configuration: 3-Point Rigid Mast
• Finish: Weathered / Uniform Rust Patina

• Structural Material: Manufactured from thick-gauge, multi-rail tubular steel with rounded safety corners to prevent livestock injury. Panels feature integrated vertical center braces to eliminate sag and maximize structural deflection resistance.
• Connection Hardware: Outfitted with standard male/female drop-pin connector loops and quick-hook hardware, allowing for fast, tool-free setup and modular configuration on uneven pasture ground.
• Condition: The panels are in solid, functional, field-used condition. The original factory finishes (green and red) show widespread cosmetic weathering, fading, and surface oxidation from outdoor exposure. The structural tubes remain robust and straight, with no severe crush zones, major kinks, or broken structural welds visible in the stack.
• Inclusions: Selling as one complete, stacked lot. Includes all corral panels, wire-mesh utility panels, and integrated gate assemblies contained within the visible pile.

• Product Type: Tubular Steel Corral Panels
• Panel Style: Multi-Rail Utility / Rounded Corners
• Finish: Weathered Paint (Red & Green Mix)
• Connection Style: Interlocking Pin & Loop
• Lot Type: Bulk Stack (One Price Takes All)

• Structural Material: Manufactured from thick-gauge, multi-rail tubular steel with rounded safety corners to prevent livestock injury. Panels feature integrated vertical center braces to eliminate sag and maximize structural deflection resistance.
• Connection Hardware: Outfitted with standard male/female drop-pin connector loops and quick-hook hardware, allowing for fast, tool-free setup and modular configuration on uneven pasture ground.
• Condition: The panels are in solid, functional, field-used condition. The original factory finishes (green and red) show widespread cosmetic weathering, fading, and surface oxidation from outdoor exposure. The structural tubes remain robust and straight, with no severe crush zones, major kinks, or broken structural welds visible in the stack.
• Inclusions: Selling as one complete, stacked lot. Includes all corral panels, wire-mesh utility panels, and integrated gate assemblies contained within the visible pile.

• Product Type: Tubular Steel Corral Panels
• Panel Style: Multi-Rail Utility / Rounded Corners
• Finish: Weathered Paint (Red & Green Mix)
• Connection Style: Interlocking Pin & Loop
• Lot Type: Bulk Stack (One Price Takes All)

• Dual-Function Utility: Features a long, tapered heat-treated steel main spear prong designed for centered puncture stability in large round hay bales. The top upright mast is equipped with a integrated 2-inch chrome tow ball for moving standard bumper-pull farm trailers.
• Frame & Hitch Connection: Built on a heavy-gauge square steel tube toolbar base with reinforced weldments. Outfitted with standard Category I lower pull pins and a dual-eared top-link mast connection to handle structural lift leverage smoothly.
• Condition: The attachment is in good, functional, field-used condition. The red factory paint finish is largely intact with standard cosmetic scuffs, minor scratches, and light surface oxidation along the lower pins and base edges. The main spear prong is physically straight and free of structural bends or fractures. The chrome hitch ball shows minor surface scoring from normal latch friction but remains secure.
• Inclusions: Complete 3-point combo framework, (1) removable main bale spear prong with rear locknut, (2) installed lower lift pins, and (1) mounted 2" chrome hitch ball.

• Product Type: 3-Point Bale Spear & Tow Combo
• Hitch Compatibility: Category I Standard 3-Point Lift
• Prong Configuration: Single Main Spear
• Hitch Ball Size: 2-Inch Chrome Ball
• Frame Construction: Welded Square Steel Tubing

• Adjustable Spacing: Built with a heavy square-tubing steel frame that features multiple pre-drilled adjustment holes along the top and bottom rails. This allows the producer to adjust the width of the vertical calf entry openings to match growing calves.
• Heavy-Duty Construction: Fabricated from rigid square steel tubing rather than lightweight round pipe, offering maximum resistance against crowding pressures from adult cattle.
• Mounting Setup: Includes integrated flat steel flange mounting brackets on the corner posts for secure attachment to posts, walls, or existing corral systems.
• Condition: The gate panel is straight, structurally sound, and free of major bends or broken welds. It exhibits standard outdoor farm wear, including paint fading and minor surface rust patches, but remains fully field-ready.

• Length: 8 Feet (96 inches)
• Material: Square Steel Tubing
• Application: Calf Creep Feeding / Livestock Sorting
• Adjustment Style: Pin/Bolt selectable width

• Rust-Proof Material: Fabricated entirely from high-density poly piping with secure bolted joints. It is immune to weather deterioration, moisture, and corrosive liquid manure or fertilizers.
• Livestock Safety: Smooth, rounded plastic finish minimizes hair rub and completely eliminates the risk of metal cuts or scrapes to cattle, horses, or calves.
• Structural Condition: The feeder is in excellent, clean condition. All three horizontal rails and vertical support posts are straight, rigid, and free from structural cracks, deep gouges, or sun-brittleness.
• Hardware: The metal assembly bolts at the pipe intersections are intact and secure.

• Diameter: 8 Feet
• Height: 4 Feet
• Material: Heavy-Duty Polyethylene / Poly Pipe
• Application: Cattle, Horses, and General Livestock Round Bale Feeding

• Frame Construction: Supported by sturdy tubular steel frames with wide ground skids to prevent tipping. The frames show standard surface rust and weathered patina from outdoor pasture placement but remain structurally sound.
• Poly Liners: One of the liners exhibits a broken section/crack on the outer plastic lip end (as shown in the close-up photo). The other two liners are intact with normal scratches, scuffs, and dirt staining from use. None of the wear impacts their ability to hold dry feed or grain.
• Drainage: Molded-in drainage holes are located along the bottom pan to keep feed dry and prevent water from stagnating.

• Quantity: 3 Troughs
• Length: Approx. 10 Feet each
• Material: Galvanized Steel & High-Density Polyethylene
• Application: Cattle / Livestock Bulk Feeding

• Exceptional Condition: This unit is exceptionally clean, well-maintained, and has clearly been stored indoors out of the elements.
• Bale Count: The mechanical counter shows a remarkably low reading of 00102.
• Driveline: Equipped with a standard 540 RPM PTO input drive shaft featuring an intact plastic master shielding tube and an agile, heavy-duty universal joint assembly.
• Pickup & Feed System: The pickup reel assembly is in excellent physical condition with straight, unbent steel teeth and pristine side guards. Both adjustable ground gauge wheels are intact and functional.
• Knotter & Timing System: The dual twine-tie knotters are extremely clean and free from rust scale or old grease buildup. The original factory needle-timing and operating instruction decals remain perfectly legible on the service panel.
• Tires: Mounted on high-tread, clean pneumatic implement tires holding full pressure with no visible dry-rotting or sidewall weathering.

• Brand: Hesston (AGCO)
• Model: 4550
• Serial Number: 4550-03118
• Design: Center-Line Inline
• Bale Size: 14" x 18"
• Input Speed: 540 PTO

• Chamber & Belts: The variable bale chamber features heavy-duty, high-traction forming belts. The belts are clean, correctly tensioned, and show crisp edges without severe fraying, tears, or weather-checking.
• Driveline Setup: Equipped with a standard 540 RPM PTO input drive shaft featuring a heavy rubber cv-boot shield and a heavy-duty constant velocity hitch knuckle setup for tight turning radius fields.
• Pickup Reel: The front pickup assembly is exceptionally straight. The pickup tines are present, unbent, and properly spaced. Includes the original adjustable side-gauge pasture wheel.
• Mechanical Components: Side access doors open smoothly to reveal pristine main drive chains, gears, and tensioners. There is no major grease sludge or rust flaking. Includes a dedicated twin-pack twine storage tray containing partial twine balls.
• Tires: Mounted on premium, high-flotation wide implement tires. The tread patterns are sharp, clean, and hold maximum air pressure without visible dry-rotting.
• Decals & Safety: Features fully legible original factory operating notices, drawbar layout instructions, and an intact slow-moving vehicle (SMV) triangle rear reflector emblem.

• Brand: Hesston (AGCO)
• Model: 745 "Rounder"
• Serial Number: HR89115
• Bale Size: 4' x 5' Variable
• Input Speed: 540 PTO

• Lifting Performance: Rated for a massive 22-ton lifting capacity. It combines a long handle design with a compact chassis to reach deep underneath axles and differential housings safely.
• Dual Operation Controls: Features a top-mounted turn-knob release valve on the handle grips for precision lowering control, along with an integrated air line toggle switch.
• Air Line Connections: Fitted with a quick-connect male industrial pneumatic coupler nipple, complete with an extra-long high-pressure air supply line wrapped over the handle storage hooks.
• Mobility: Equipped with large, rugged composite wheels that roll smoothly over gravel or concrete shop floors, complemented by a welded rear frame positioning handle.
• Condition: The jack is in great physical and cosmetic shape, showing only light scratches and minimal dirt buildup from occasional shop use. The lift cylinder piston saddle, base body, and handle frame show no fluid leaks or structural distortion.

• Brand: Sunex Tools
• Model: 6635A
• Serial Number: T12020000067
• Capacity: 22 Tons
• Power Source: Air / Hydraulic

UNTESTED

• Premium Squeeze Mechanism: Equipped with a synchronized double-side squeeze that keeps livestock centered down the chute floor to prevent tipping. Features a double side-exit emergency doorway for rapid or specialized sorting releases.
• Self-Catch Headgate: Includes a 2018-manufactured Big Valley manual/automatic self-catch headgate. The spring-loaded locking bars move smoothly and can adjust easily to match various livestock shoulder widths.
• Tailgate Operation: Configured with a pull-rope vertical drop entry tailgate that prevents trailing animals from crowding the chute operator.
• Condition: Excellent, clean structural condition. This implement has been stored undercover out of direct rain and sun. The linkages, hinges, grease points, and drop-bars move freely. The factory green powder coat paint is bright with minimal surface scratching and negligible rust.

• Brand: Behlen Country (Big Valley)
• Model: M1-V Chute / M-Series Headgate
• Serial / Part Number: 62175882 / 60110132
• Exit Options: Double Side Exit / Front Release

Here's a lot description for the BC5070:

New Holland BC5070 twine-tie small square baler, PIN Y9N101331. The BC5070 is New Holland's proven small square (two-string) baler — the direct successor to the legendary 570/575 series and the standard for producers serving the horse hay and small-livestock market. Carries the commemorative "700,000 Small Square Balers" badge marking New Holland's production milestone.

Features include a wide yellow pickup with full sets of pickup teeth, twine knotter tie system, hydraulic bale chute/tension, flywheel PTO driveline (540 PTO), and pull-type hitch. Tandem-style flotation on the pickup gauge wheel, road tires hold air with good tread remaining, and the bale counter is present and functional.

Decals and sheet metal present bright, with no visible damage to the bale chamber or pickup. A well-maintained, field-ready baler from a complete hay-equipment dispersal.

Sold as-is, where-is. Buyer responsible for inspection, removal, and transport. All available serial/PIN information photographed and on file. Knotter operation and bale counter reading available at preview — serious buyers encouraged to inspect prior to bidding.